主页
联系方式
产品
CAD图纸
新产品
印刷品
視頻
解决方案
下载
新闻
通讯
链接
新闻
直通型真空过滤器 FCL
这是大型的直通型过滤器，能够过滤杂质和非常细小的粉尘，对流量的干扰几乎可以忽略。
...
真空调节器
该设备可调节真空度并将其恒定在预设值(副低压)上，而不受网络(主低压)真空度范围与波动的影响。
该调节器利用副低压和大气压力之间的差值，靠隔膜柱塞工作。
...
气动真空调节器
气动真空调节器与前文所述的不同之处在于调节真空度的方式，这款调节器不具备手动调节 螺母，而是通过调节气缸的供应压缩空气压力进行调节的，压力越高，获得的真空度就越 大，反之亦然。...
同轴阀芯气动阀
该电磁阀的功能是切断真空发生器的压缩空气供应，通过一个原装的同轴阀芯进行切断，可提供大量的空气，从而确保吸盘最快的抓持速度。
...
VACUMANAGER VM系列电源装置
VACUMANAGER VM系列电源装置是一个电动气动集成电路，专为单级和多级真 空发生器的电源和管理而设计。 VM装置封装在一个主体/分配器中，从实心铝加工而成并经过阳极氧化处 理:
- 带显示器的数字真空开关
-...
两通与三通真空电控制器
专为真空系统而设，可直接作用，为常闭状态。 由一个阳极氧化铝质阀体(阀体中设有接口和通道孔口) 以及一个由电线圈驱动的执行器组成。NBR丁腈橡胶或 vulkollan®材质的电控制器阀芯是执行器运动核心的组成部 分。...
News! Electrical equipment for vacuum tests ATC01
This device has been made mainly to test the air-tightness of compostable capsules, although it is possible to test any kind of material that can be placed inside equipment.
The principle of operation is based on the detection of capsule deformations, under the direct action of the...
Special PH and P2H suction plates for OCTOPUS systems
The special suction plates PH and P2H can be installed on OCTOPUS systems to replace the PX and P2X plates.
They are made of anodised aluminium sheets with holes equidistant from each other and coated with a special sponge rubber, microperforated at the holes in the aluminium sheet, in...
Switchgear equipped with touch screen operator panel
The new electrical equipment consists of a touch screen, which is a special electronic device that is the result of combining a screen and a digitizer that allow the user to interact with a graphical interface using their fingers or specific objects.
The touch screen operator panels...
New direct drive, high flow 2-way vacuum solenoid valves
These direct drive two-way, two-position vacuum solenoid valves in the new series feature a conical shutter servo-controlled by the vacuum.
They are normally closed, but they can be supplied normally open upon request.
They are composed of an anodised aluminium body where the...
Single-stage vacuum generators with ejector FVG 8 and FVG 12
Specifically designed for very high frequency gripping and release applications, these single-stage vacuum generators are based on the Venturi principle and are equipped with a pneumatic ejector, which can be implemented on request through the M7 connection on the lid, to allow maximum speed in...
Special vacuum cups for the pharmaceutical sector
These vacuum cups have been designed and manufactured for the pharmaceutical sector.
They are used for handling syringes that are filled with liquid and capped during their transfer, making use of the internal passages on the special supports (not supplied) on which they are fitted.
...
Vuototecnica is on TraceParts: CAD designs available online
The Vuototecnica catalogue is now available on TraceParts, an online 3D cataloging service, an easy-to-consult platform.
Thanks to TraceParts, its compatibility tools in various CAD formats, its multi-language interface and 24/24 accessibility, Vuototecnica arrives on the screens...
New Vacupredator suction cups, ready to “bite”
Designed to facilitate robot integrators in one of the most difficult tasks in the field of handling in the packaging sector, they are perfect for picking up bags and flow packs, which are difficult to take by traditional rubber suction cups due to their flexibility.
The suction...
New digital vacuum switches with two-colour display
These new digital vacuum switches with two-colour display are enclosed within a robust ABS container. They are carefully calibrated and at compensated temperature, ensuring high-precision measurement values.
Detected values are viewed on the main two-colour (red and green) display and...
Single-stage and multi-stage vacuum generators, MSVE series
The vacuum generators of this new series can fully drive a negative pressure gripping system.
By means of coaxial shutters, the original compressed air supply system feeds large quantities of air to both the ejectors and the ejection system, thereby ensuring faster gripping and...
New digital vacuum switches
These new digital vacuum switches made with ABS body are really compact and extremely light to allow for its installation on board automatisms and near use.
These carefully calibrated devices are able to provide very accurate measurement values. The detected values are shown on the...
Flat and bellow elliptical suction cups with relative supports
Vuototecnica offers you a complete range of flat elliptical suction cups, normally used for gripping, handling and clamping cardboard cases and boxes, wood shingles, small ceramic or brick tiles, iron or stainless steel profiles, sheets and anything else present on long, narrow gripping...
Production Programme
The Vuototecnica brochure about the Production Programme is available in the Download section.
Two bellow suction cups for heavy-duty packaging
Vuototecnica has devised the all new two bellow suction cups for the handling of especially heavy cardboard boxes and packaging in the packaging sector.
These suction cups are able to compensate for the gripping height with a greater recovery of the unevenness of the load to be...
Bellow suction cups for the gripping of flowpack packaging
Created from experience, Vuototecnica welcomes the new increased performance bellows suction cups 01 30 45 S.
Especially suitable for installation on automatic, high production machines in the packaging sector, equipped with a grip lip designed to be extremely flexible, able to...
New rotary vane vacuum pumps, RVP series
Vuototecnica is proud to present a new range of rotary vane vacuum pumps, RVP.
It is an innovative product, which is technically complete in its standard equipment, built with the latest generation materials and at high standards of quality. It has a very high efficiency, and it is...
新真空电磁阀,从今起更快速!
来源于Vuototecnica的创新以及经验积累，诞生了全新创新系列真空电磁阀，保证快速响应。
...
Single-stage vacuum generators FVG 3 - 5 with ejector
Specifically designed for very high frequency gripping and release applications, these single-stage vacuum generators are based on the Venturi principle and are equipped with a pneumatic ejector to allow maximum speed in restoring the atmospheric pressure of use.
The key features...
Cartridge vacuum generators PVR 1-4
• Can be directly integrated on suction gripping parts of the packaging machines
• Maximum output at low operating pressures (2 - 3 bar)
• Maximum vacuum level: -70 KPa
• Flow rates of 1 or 4 m3/h
• Their shape enables the suction of dust or small...
New FB28 suction filter with metal cartridge
The new FB28 suction filter with metal cartridge replaces the FB25 filter, no longer in production. Both attacks (G3/4") and capacity (40 cum/h) remain the same while size and weight are different (see the attached datasheet).
Preventing impurities from reaching the vacuum pump is...
微型吸盘支架 20 80 05
• 尺寸和重量大幅减少
• 柄和弹簧都为不锈钢造
• 自动润滑的轴套集成螺纹套管，确保柄滑动顺畅以及延长使用寿命。
• 拾取&装贴以及操控用于从冲压成型机上卸载塑料物品。
•...
单级真空发生器 PVP SSX
• 有9,14和18mc/h 三种功率可供选择
• 最终绝对压力值150mbar
• 不锈钢材料喷射器，批量的
• EPDM材质密封垫圈
• 全部由经由阳极化处理的铝制成
•...
球铰链接以及轴向真空连接 GSL
该系列的连接器是设计使用安装于带有支撑的吸盘,尤其是平板或薄唇吸盘,以便可以更为容易的附着在负载物的表面，并且即使没有完全平行于吸盘或者为了弥补垂直差额，通常核查吸盘支撑和自动化固定支撑。
...
沃泰可新型章鱼式真空抓取吸盘系统，现在更轻巧！
机器人产品以及码垛系统需要真空抓取系统越来越灵活、人性化。
...
当真空发生器非常紧凑时
Vuototecnica 推荐新一代的单击真空发生器PVP 05.
完全附着在当前的物体上。
Vuototecnica设计制造了需要紧密接触的应用工具。
新款真空发生器PVP 05，...
真空控制的巨人
There are situations in which the use of an instrument able to provide an accurate signal once a certain vacuum level has been reached is recommended for safety purposes; such situations include the starting of a work cycle, or checking the grip of suction cups, etc.
Vuototecnica...
传统创新:新款Bernoulli吸盘
Vuototecnica research has led to the creation of a new range of vacuum cups based on Bernoulli’s principle.
These new vacuum cups are ideal for handling, without any contact, fragile, uneven or microperforated objects, such as semiconductor platelets, silicon disks, solar cells, precious...
