footer
CAD drawings of Vuototecnica products on Traceparts
Vuototecnica Newsletter
Vacuumdaily.com
Vacuumdaily.net
Facebook Twitter Linkedin YouTube

Search results for "FCL" Vuototecnica

FCL in-line suction filters, with paper cartridge

FCL in-line suction filters, with paper cartridge

These small in-line filters retain impurities and very fine dust, interfering with the flow rate in a negligible manner. Thanks to their reduced size, they can be directly installed onto vacuum piping, close to the utilities (vacuum cups, vacuum clamping systems, etc.) for a fractionated filtration and a better visual control of all the plant suction points.
They are composed of a cylindrical transparent Plexiglass body closed by two anodised aluminium flanges kept in place by Seeger rings, where all the threaded male or female connections and seals are located. Inside there is a filtering cartridge with a filtering degree equal to 7 μ, which is made with a special treated paper that is pleated to increase the filtering surface. The filters can be inspected by simply removing one of the two flanges. Due to the paper filtering element, these filters are not recommended in presence of water or oil vapours or condensations.
Technical features
Operating pressure: from 0.5 to 3000 absolute mbar
Fluid temperature: from -20 to +60°C
Level of filtration: 7 μ
Product codes: FCL1 FCL2 FCL3 FCL1M FCL2M FCL3M FCL1MF FCL2MF FCL3MF

Image zoom
top of page go down
Paper filtering cartridges for FCL filters

Paper filtering cartridges for FCL filters

The cartridges described below are suited for FCL filters.
They are made with a special treated paper with a filtering degree equal to 7 μ, which is pleated in order to increase its surface and wrapped on two flanges in plastic material. They are recommended for retaining impurities and fine dust, but not in presence of water or oil vapours or condensations.
Product code: 00FCL03

5.02  
CAD files on TraceParts
Image zoom
top of page go down
FCL 4, FCL 5, FCL 6 and FCL 7 in-line suction filters

FCL 4, FCL 5, FCL 6 and FCL 7 in-line suction filters

These large in-line filters retain impurities and very fine dust, interfering with the flow rate in a negligible manner.
They are composed of a cylindrical transparent Plexiglass body closed by two anodised aluminium flanges kept in place by Seeger rings, where all the threaded male or female connections and seals are located; inside there is a filtering cartridge.
The filtering cartridges illustrated and described on this page, installed in their own container, are produced with different materials that can be identified with the following abbreviations:
- Series RP. Pleated paper quick coupling filtering cartridge with double O-ring.
- Series RS. Pleated polypropylene mesh quick coupling filtering cartridge with double O-ring.
- Series RA. AISI 304 stainless steel mesh quick coupling filtering cartridge with double O-ring.
The filters can be inspected by simply removing one of the two flanges.
Technical features
Operating pressure: from 0.5 to 3000 absolute mbar Fluid temperature: from -20 to +60°C
Product codes: FCL4P FCL4S FCL4A FCL5P FCL5S FCL5A FCL6P FCL6S FCL6A FCL7P FCL7S FCL7A

5.02.1 
CAD files on TraceParts
Image zoom
top of page go down
Paper filtering cartridges for FCL 4, FCL 5, FCL 6 and FCL 7 filters

Paper filtering cartridges for FCL 4, FCL 5, FCL 6 and FCL 7 filters

Product codes: SP/5M SS/5M SA/5M RP/5 RS/5 RA/5 RP/10/57 RS/10/57 RA/10/57

5.02.2 
CAD files on TraceParts
Image zoom
top of page go down
Small pneumatic suction pumps PA

Small pneumatic suction pumps PA

The assembly of a pressure adjuster equipped with pressure gauge and of an FCL filter on the suction inlet connection of a vacuum generator of the M .. SSX range has allowed creating these small pneumatic suction pumps. Their main features include reduced overall dimensions compared to their technical performance.
The level of vacuum and flow rate can be adjusted according to the supply air pressure.
These pumps are powered with compressed air with a pressure ranging from 1 to 5 bar and they can produce a maximum vacuum of 85% and a suction flow rate between 2 and 18 m3/h, measured at a normal atmospheric pressure of 1013 mbar.
Based on the Venturi principle, they do not develop heat.
An SSX silencer screwed onto the pump exhaust ensures a silent operation. The filter equipped with a microporous cartridge is located on the suction inlet connection and can keep the finest dust and impurities.
Thanks to their static operating principle, maintenance is reduced to only a simple regular cleaning of the filter.
Product codes: PA3 PA7

10.03  
CAD files on TraceParts
Image zoom
top of page go down
Small pneumatic blowing pumps PS

Small pneumatic blowing pumps PS

The assembly of a pressure adjuster equipped with pressure gauge and of an FCL filter on the suction inlet connection of a vacuum generator of the M .. SSX range has allowed creating these small pneumatic suction pumps. Their main features include reduced overall dimensions compared to their technical performance.
The pressure and flow rate can be adjusted according to the supply air pressure.
These pumps are powered with compressed air with a pressure ranging from 1 to 5 bar and can produce a maximum pressure of 0.7 bar and a blowing flow rate between 2.7 and 31 m3/h, measured at a normal atmospheric pressure of 1013 mbar.
Based on the Venturi principle, they do not develop heat.
The filter equipped with microporous cartridge located on the air inlet connection can keep the finest dust and impurities.
Thanks to their static operating principle, maintenance is reduced to only a simple regular cleaning of the filter.
Product codes: PS3 PS7

10.08  
CAD files on TraceParts
Image zoom
top of page go down
Pneumatic suction and blowing pump suction filters

Pneumatic suction and blowing pump suction filters

To allow the pneumatic suction and blowing pumps to work even in very dusty environments, it is necessary to use these filters that, installed on the suction inlet connection, can keep the finest dust and impurities and affecting the flow rate in a negligible manner.
The filtering cartridges, in fact, are made with a special treated paper with a porosity level of 5 - 7 micron, and pleated to increase the filtering surface.
FCL filters are composed of a transparent Plexiglass cylindrical body inside of which is located the filtering cartridge locked by two anodised aluminium flanges that are kept in place by Seeger rings, inside of which the threaded connectors and the seals are housed. The filters can be inspected by simply removing one of the two flanges. The container of the filtering element FP is made with plastic and it is screwed onto the blue plastic lid; a gasket located between the two elements ensures a perfect seal.
The container of the filtering element FC, as well as its lid, are made with sheet steel and varnished with a special oxidation-resistant treatment. A seal between the lid and the container ensures a perfect vacuum seal, while the release clamps on the container allow a quick opening of the lid to check or replace the filtering cartridge.
Product codes: FCL1MF FCL2MF FP30/4/SP FC38 FC55

10.20  
CAD files on TraceParts
Image zoom
top of page go down